• signs in china Home
  • |
  • Sign in or register
  • |
  • My Account
  • |
  • Help
  • Live Chat
New Customer Privilege!
Register to get $100 exclusive coupons!
I know x
S&A AC CW-5200AI Industrial Water Chiller for a Single 1200W UV Lamp Cooling, 0.71HP, 1P 220V 50Hz
  • S&A AC CW-5200AI Industrial Water Chiller for a Single 1200W UV Lamp Cooling, 0.71HP, 1P 220V 50Hz
  • S&A AC CW-5200AI Industrial Water Chiller for a Single 1200W UV Lamp Cooling, 0.71HP, 1P 220V 50Hz
  • S&A AC CW-5200AI Industrial Water Chiller for a Single 1200W UV Lamp Cooling, 0.71HP, 1P 220V 50Hz
  • S&A AC CW-5200AI Industrial Water Chiller for a Single 1200W UV Lamp Cooling, 0.71HP, 1P 220V 50Hz

See larger image and other views (with zoom)

S&A AC CW-5200AI Industrial Water Chiller for a Single 1200W UV Lamp Cooling, 0.71HP, 1P 220V 50Hz

1400W cooling capacity, 100W DC pump, 1 outlet and 1 inlet. The water temperature is able to be adjusted.


Item Code:CW-5200AI-UV

Buyer Protection

S&A AC CW-5200AI Industrial Water Chiller for a Single 1200W UV Lamp Cooling, 0.71HP, 1P 220V 50Hz

Our CW-5200 is refrigeration type industrial water chiller of 1400W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There are 2 specifications as 1 water outlet / inlet and dual water outlet / inlet, applicable to cool single laser glass tube. 
Have design patent Certificate, CE and RoHS Certificate.
This Water Chiller has been sold largely to Europe, South America, Asia and other markets.
Economic cooling equipment, easy to install and operate, compact and easily movable.

Our industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes.

• 1400W cooling capacity; optional environmental refrigerant;
• Compact size, long working life and simple operation;
• ±0.3°C precisely temperature control; 
• The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
• Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
• Multiple power specifications; CE approval; RoHS approval;
• Optional heater and water filter.


Temperature controller panel:
(1931) CW-5000AG Water Chiller for Single 120W CO2 Laser Tube Cooling AC details3
Under normal circumstance, the new intelligent temperature controller does not need to adjust the controlling parameters.
It will self-adjust controlling parameters according to room temperature, guaranteeing to meet cooling requirements for machines.
Alarm Function’s Description:
(1931) CW-5000AG Water Chiller for Single 120W CO2 Laser Tube Cooling AC function
Flow alarm and output ports:

In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-5200series chillers possesses an unique low flow alarm protection.

The cooling water circulation loop alarm causes and the work of the state table

Normal Flow
Flow Alarm
Output Ports
Hi, H2
Output Ports
H1, H3
Circulating pump works properly ON OFF NOT RING DISCONNECTION BREAKOVER
Blocked cooling water circulation loop OFF ON RING BREAKOVER DISCONNECTION
Power interruption / / / BREAKOVER DISCONNECTION

Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V.


Cooling Method: Compression refrigeration
Adopt intelligent controller, it will automatically adjust control parameters according to room temperature changes.

Cooling Method: Fan Thermolysis 
It’s mainly used on the equipment for heat exchange between the heat and the air environment. The water temperature is related to ambient temperature.


One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically switch to appropriate operating temperature.

CW-5200AH, CW-5200BH, CW-5200DH: Applied to a cool a single 8KW CNC spindle, welding equipment or two 100W co2 laser tubes.
CW-5200AG, CW-5200BG, CW-5200DG: Applied to cool a single 130W / 150W CO2 laser tube.
CW-5200AI, CW-5200BI, CW-5200DI: Applied to cool a single 50W-75W laser diode, a single15W-30W solid-state laser or a single 30W RF laser tube.
CW-5200AI-UV: Applied to cool the UV lamp under 1200W of the uv printer machine.

Model CW-5200AG CW-5200BG CW-5200DG CW-5200AH CW-5200BH CW-5200DH CW-5200AI CW-5200-BI
Voltage AC 1P
AC 1P 220V AC 1P 110V AC 1P 220V AC 1P 220V AC 1P 110V AC 1P 220V AC 1P
Frequency 50Hz 60HZ 60HZ 50Hz 60HZ 60HZ 50Hz 60HZ
Current 2.4-3.1A 2.6-3.3A 4.5-6.5A 2.4-3.1A 2.6-3.3A 4.5-6.5A 2.4-3.1A 2.6-3.3A
Compressor Power 0.52KW 0.5KW 0.68KW 0.52KW 0.5KW 0.68KW 0.52KW 0.5KW
0.71HP 0.68HP 0.93HP 0.71HP 0.68HP 0.93HP 0.71HP 0.68HP
Refrigeration Capacity 5084Btu/h 4982Btu/h 5186Btu/h 5084Btu/h 4982Btu/h 5186Btu/h 5084Btu/h 4982Btu/h
1.49KW 1.46KW 1.52KW 1.49KW 1.46KW 1.52KW 1.49KW 1.46KW
1281Kcal/h 1561Kcal/h 1307Kcal/h 1281Kcal/h 1561Kcal/h 1307Kcal/h 1281Kcal/h 1561Kcal/h
Refrigerant Charge 360g 380g 350g 360g 380g 350g 360g 380g
Pump Power 0.03KW 0.05KW 0.1KW
Mac. Lift 10M 12M 25M
Max. Flow 10L/min 13L/min 16L/min
Inlet and Outlet External Diameter: 10mm brass connector Diameter 10mm speedy connector

Industrial cooling machine’s installation is very simple, the new machine for the first time using, you can install it as following steps.

Open the package to check if the machine is intact and all the necessary accessories are completed.

Open the injection port to feed cooling water.
Observing the water level gauge and adding water slowly, be careful not to have the water overflowed! For the cooling of carbon steel equipment, the water should be added an appropriate amount of anti - corrosion agentia. Working in cold north area, it’s better to use noncorrosive antifreeze fluid.

According to system conditions, please connect the water inlet and outlet pipe well.

Plug in power, turn on the power switch. (Do not start up without water in the water tank!)
(1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal.
(2) After the first boot, you must immediately check whether the water pipe leaks.
(3) Power switched on, if the water temperature is below the set figure, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters.
(4) As it takes a longer time to start the compressor and other components, according to different conditions, the time is range from seconds to minutes, so do not turn off the power and again on frequently.

E.  Check the water level in the water tank.

The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it’s allowed to add adequate water again. Please observe and record the current water level, and inspect it again after the chiller running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage.

Adjust parameters of temperature controller.
CW-5200 series use an intelligent thermostat. Normally users do not need to adjust it. If it is really necessary, please refer to “Operating status and parameters adjustment.”CW-5000AK Water Chiller using steps

One of the differences between the CW5200 water tank and the CW3000 tank lies in that the CW5200 water tank can keep the water at a uniform temperature. Its cooling function can keep the temperature at a certain value, which can be adjusted manually. All the parameters related to the water tank have been set as the correct value by our company before delivery. The user may refer to the parameter instruction manual of the water tank for detailed description on the parameters. It is strongly suggested that the user should not change the parameters without authorization. Our company accepts no responsibility for any insolvable problems caused by the user’s unauthorized changing of parameters

Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation.  You can use non – corrosive antifreeze if you are in the northern cold regions.

1. Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Although the average operating current of the chiller is small, but the instantaneous operating current could be up to 6 ~ 10amps sometimes (The instantaneous operating current of models of AC110V power supply are possible to be up to 10 ~ 15amps).
2. Please make sure there is a stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 200 ~ 250V (110V model is of 100 ~130V). If you do need a wider operating voltage range, customization is available for us.
3. To protect the pump, it’s strictly forbidden to run the chiller without having water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. When the water level is below the green (NORMAL) range of the water level gauge, the cooling capacity of our chiller will go down slightly. Hence please ensure the water level is within the green (NORMAL) range. To drain through circulating pump is strictly prohibited!
4. Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet.
5. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller.
6. Please pay attention to the effect of the condensate water! With greater ambient humidity, when the water temperature is lower than the ambient temperature, the condensate water will generate on the surface of water circular pipes and the cooled components. If above circumstance appears, it is recommended to set a higher water temperature or keep pipes and cooled parts warm.








(1931) CW-5000AG Water Chiller for Single 120W CO2 Laser Tube Cooling AC process1(1931) CW-5000AG Water Chiller for Single 120W CO2 Laser Tube Cooling AC process2

Quality report

(1931) CW-5000AG Water Chiller for Single 120W CO2 Laser Tube Cooling AC quality report


  • All
  • Item Description
  • Shipping
  • Payment
  • Other
Ask a question

Select a topic:

Item Description Shipping Payment Other


Attach files:

(File Format:Jpg,Png,CDR,PSD,Ai,PDF or any other file to describe the product.Maximum Single File Size:2GB.)

Verification code:

Shipping :
We ship to more than 200 countries and 300 ports worldwide!
By Express: 3-5 business days
By Sea: 20-60 business days
How much to ship to
my place?
Payment methods:
Credit Cards we accept:
Credit Cards
Payment Services:
Payment Services

Video Guide:

People Also Like Following Products

Want to be Updated with More Promotions? YES!

E-mail sign up for special offers

Product Tags : A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9

©2006-2016 by Beijing ChinaSigns Information Company Limited All Rights Reserved.

Our local sites:

www.Sign-in-China.com, who belongs to Beijing ChinaSigns Information Co., Ltd. is the biggest online supplier of sign products in the world and specialized in providing One Stop Solution for customers to select AD equipments, AD consuming materials, sign exhibition products, etc.

She is also the authorized overseas service center by China Inkjet Printing Association, for which we have set up overseas branches in 6 foreign countries in order to provide better service for our customers all over the world.

Our products cover all field of the AD and signage and all the products we supply are made in accordance with international quality standards as a result that, at present, we have more than 9,000 products online for sale. Since we implement the centralized purchasing, all the products are quoted with competitive prices. Besides, the product quality and our service are both guaranteed by China Inkjet Printing Association as well.